| E1 | 86 mm ±0.2 | ||
| B1 | 56 | mm | |
| A | 50 | mm | |
| E2 | 58 mm ±0.2 | ||
| Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 4 - 21 |
||
| L | 80 | mm | |
| V (Tolerance ISO 8062-3 - DCTG 9.) | 12 | mm |
| B (Tolerance ISO 8062-3 - DCTG 9.) | 78 | ||
| D | 62 | mm | |
| A (Tolerance ISO 8062-3 - DCTG 9.) | 108 | mm | |
| H | 45 | mm | |
| H2 (Tolerance ISO 8062-3 - DCTG 9.) | 77 | mm | |
| S | 9 | ||
| W (Minimum size in relation to Ø d.) | 16.80 | mm |
| amax | 100 | m/s² | |
| m | 2.25 | kg | |
| Breakaway force | 32 | N | |
| Operating conditions | Operating conditions |
| vmax | 2.50 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 11 | N | |
| Shaft radial clearance h6 | + 45 + 5 |
||
| Permissible ambient temperature (min ... max) (for standard Linear Bushings without wiper seals) | -10 °C ... +100 °C |
