| Rib diameter inner ring | d1 | 21 | mm |
| Contact angle | α | 60 | ° |
| Minimum chamfer dimension | rmin | 0.60 | mm |
| Bore diameter | d | 10 | mm |
| Outside diameter | D | 34 | mm |
| Width | B | 20 | mm |
| Basic dynamic load rating, axial | Ca | 13,400 | |
| Fatigue load limit, axial | Cua | 850 | N |
| Thermally safe operating speed | nϑ | 4,600 |
| Bore diameter lower tolerance | -0.01 | mm | |
| Outside diameter lower tolerance | -0.01 | mm | |
| Width lower tolerance | -0.25 | mm | |
| Basic static load rating, axial | C0a | 18,800 | |
| Limiting speed for grease lubrication | nG Grease | 10,900 | |
| Bearing frictional torque | MR | 0.12 | Nm |
| Maximum diameter of housing | Da max | 28 | mm |
| Minimum diameter shaft | da min | 14 | mm |
