| E4 | 60 | mm | |
| D | 47 | mm | |
| E1 | 34 mm ±0.15 | ||
| E3 | 48 | mm | |
| H1 | 82 | mm | |
| L | 79 | mm | |
| N1 | 55 | mm | |
| S (Cylinder bolts ISO 4762-8.8) | 13.50 | ||
| S2 (Pin hole centering.) | 10 | ||
| V | 8 | mm |
| H | 40 | mm | |
| A | 86 | mm | |
| E2 | 42 mm ±0.15 | ||
| Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 5 - 19 |
||
| H4 | 30 | mm | |
| m (Clamped (fastened) in relation to Ø d.) | 25 mm ±0.01 | ||
| N2 | 24 | mm | |
| S1 | M16 | ||
| SW | 3 | ||
| W (Minimum size in relation to Ø d.) | 12.50 | mm |
| amax | 100 | m/s² | |
| m | 1.30 | kg | |
| Breakaway force | 24 | N | |
| Operating conditions | Operating conditions |
| vmax | 2.50 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 8 | N | |
| Shaft radial clearance h6 (Clamped (fastened).) | + 38 + 4 |
||
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
