| Contact angle | α | 35 | ° |
| Radius retaining slot | rn | 1 | mm |
| Hight retaining slot | t | 8.10 | mm |
| Shoulder diameter inner ring | d1 | 114.30 | mm |
| Minimum chamfer dimension | rmin | 2 | mm |
| Angle retaining slot | 45 | ° | |
| Width retaining slot | b | 6.50 | mm |
| Distance between the apexes of the pressure cones | a | 88 | mm |
| Shoulder diameter outer ring | D1 | 136.10 | mm |
| Maximum fillet radius | ra max | 2 | mm |
| Minimum diameter shaft shoulder | da min | 101 | mm |
| Maximum diameter of housing shoulder | Da max | 149 | mm |
| Reference speed | nϑr | 3,850 | |
| Fatigue load limit, radial | Cur | 12,100 | |
| Basic dynamic load rating, radial | Cr | 181,000 | |
| Outside diameter | D | 160 | mm |
| Limiting speed | nG | 8,200 | |
| Basic static load rating, radial | C0r | 185,000 | |
| Width | B | 30 | mm |
| Bore diameter | d | 90 | mm |
