| Minimum chamfer dimension | rmin | 1 | mm |
| Contact angle | α | 15 | ° |
| Bore diameter | d | 170 | mm |
| Width | B | 28 | mm |
| Basic static load rating, radial | C0r | 115,000 | |
| Limiting speed for grease lubrication | nG Grease | 5,600 |
| Outside diameter | D | 230 | mm |
| Basic dynamic load rating, radial | Cr | 133,000 | |
| Fatigue load limit, radial | Cur | 8,600 | |
| Limiting speed for oil lubrication | nG Oil | 8,500 |
| Diameter shaft shoulder | da | 180 | mm |
| Shoulder diameter outer ring | Da | 219 | mm |
| Maximum recess radius | ra max | 1 | mm |
| Maximum diameter injection pitch | Etk max | 194.70 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 188.60 | mm |
| Distance between the apexes of the pressure cones | a | 40.80 | mm |
