| Contact angle | α | 15 | ° |
| Minimum chamfer dimension | rmin | 1 | mm |
| Distance between the apexes of the pressure cones | a | 39.50 | mm |
| Minimum diameter injection pitch | Etk min | 179.50 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 184.70 | mm |
| Maximum recess radius | ra max | 1 | mm |
| Shoulder diameter outer ring | Da | 209 | mm |
| Diameter shaft shoulder | da | 170 | mm |
| Limiting speed for oil lubrication | nG Oil | 9,000 | |
| Fatigue load limit, radial | Cur | 8,100 | |
| Basic dynamic load rating, radial | Cr | 128,000 | |
| Outside diameter | D | 220 | mm |
| Limiting speed for grease lubrication | nG Grease | 6,000 | |
| Basic static load rating, radial | C0r | 106,000 | |
| Width | B | 28 | mm |
| Bore diameter | d | 160 | mm |
