| Bore diameter | d | 8 | mm |
| Outside diameter bearing pot | D | 23.90 | mm |
| Outside diameter bearing pot lower tolerance | -0.01 | mm | |
| Inner ring width upper tolerance | 0.25 | mm | |
| Basic dynamic load rating, radial | Cr | 5,000 | |
| Basic dynamic load rating, axial | Ca | 2,060 | |
| Fatigue load limit, radial | Cur | 142 | N |
| Bore diameter lower tolerance | -0.01 | mm | |
| Outside diameter bearing pot upper tolerance | 0.03 | mm | |
| Width, inner ring | Bi | 14 | mm |
| Inner ring width lower tolerance | -0.25 | mm | |
| Basic static load rating, radial | C0r | 2,700 | |
| Basic static load rating, axial | C0a | 1,850 | |
| Bearing friction torque | MRL | 0.06 | Nm |
| Diameter shaft shoulder | da | 10.40 | mm |
| Minimum support diameter outer ring outside | Daa min | 22 | mm |
| Number of screws | n | 4 | |
| Number of screws b | n | 2 |
| Support diameter outer ring inside | Dai | 18 | mm |
| Screw size | M4 | ||
| Screw size b | M6 |
| Rib diameter inner ring | d1 | 11 | mm |
| Fixing boring diameter | d2 | 4.50 | mm |
| Height flange | A2 | 35 | mm |
| Bore distance height | m | 26 | mm |
| Distance fixing groove | M | 35 | mm |
| Minimum chamfer dimension | rmin | 0.30 | mm |
| Flange width | A | 28 | mm |
| Wide fixing groove | b | 6.60 | mm |
| bore distance width | n | 20 | mm |
| Height housing | A | 15.50 | mm |
