| Bore diameter | d | 65 | mm |
| Hight | H2 | 103 | mm |
| Basic static load rating, axial | C0a | 500,000 | |
| Basic static load rating, radial | C0r | 104,000 | |
| Fatigue load limit, radial | Cur | 14,900 | |
| Limiting speed for grease lubrication | nG Grease | 900 | 1/min |
| Outside diameter | D | 125 | mm |
| Basic dynamic load rating, axial | Ca | 172,000 | |
| Basic dynamic load rating, radial | Cr | 54,000 | |
| Fatigue load limit, axial | Cua | 46,500 | |
| Limiting speed for oil lubrication | nG Oil | 2,600 | |
| Bearing friction torque | MRL | 2.95 | Nm |
| Maximum diameter of housing shoulder | Da max | 111 | mm |
| Minimum diameter shaft shoulder | da min | 88 | mm |
| Height outer ring over wave washer | H1 | 74.50 | mm |
| Rip diameter shaft washer | d1 | 110 | mm |
| Outside diameter wave washer long | D3 | 108 | mm |
| Width wave washer long | B1 | 38.50 | mm |
| Minimum chamfer dimension | rmin | 0.60 | mm |
| Width, outer ring | C | 25 | mm |
| Heeldiameter wave washer long | D2 | 90 | mm |
| Width, inner ring | B | 17.50 | mm |
| Width heel wave washer long | B2 | 18 | mm |
