| Bore diameter | d | 40 | mm |
| Hight | H2 | 54 | mm |
| Basic static load rating, axial | C0a | 163,000 | |
| Basic static load rating, radial | C0r | 53,000 | |
| Fatigue load limit, radial | Cur | 7,600 | |
| Limiting speed for grease lubrication | nG Grease | 1,600 |
| Outside diameter | D | 75 | mm |
| Basic dynamic load rating, axial | Ca | 59,000 | |
| Basic dynamic load rating, radial | Cr | 27,500 | |
| Fatigue load limit, axial | Cua | 14,200 | |
| Limiting speed for oil lubrication | nG Oil | 4,400 | |
| Bearing friction torque | MRL | 0.74 | Nm |
| Maximum diameter of housing shoulder | Da max | 66 | mm |
| Minimum diameter shaft shoulder | da min | 55 | mm |
| Height outer ring over wave washer | H1 | 37 | mm |
| Rip diameter shaft washer | d1 | 65 | mm |
| Minimum chamfer dimension | rmin | 0.60 | mm |
| Width, outer ring | C | 20 | mm |
| Width, inner ring | B | 11 | mm |
