| Bore diameter | d | 55 | mm |
| Height | T | 103 | mm |
| Basic static load rating, axial | C0a | 500,000 | |
| Basic static load rating, radial | C0r | 98,000 | |
| Fatigue load limit, radial | Cur | 13,800 | |
| Limiting speed for grease lubrication | nG Grease | 1,000 |
| Outside diameter | D | 145 | mm |
| Basic dynamic load rating, axial | Ca | 177,000 | |
| Basic dynamic load rating, radial | Cr | 44,000 | |
| Fatigue load limit, axial | Cua | 46,500 | |
| Limiting speed for oil lubrication | nG Oil | 2,900 | |
| Bearing friction torque | MRL | 2.95 | Nm |
| Maximum diameter of housing shoulder | Da max | 101 | mm |
| Minimum diameter shaft shoulder | da min | 78 | mm |
| Height outer ring over wave washer | H1 | 72 | mm |
| Distance to lubrication hole | Ca | 12.50 | mm |
| Heeldiameter wave washer long | D2 | 80 | mm |
| Width, wave washer | B | 17.50 | mm |
| Width heel wave washer long | B2 | 18 | mm |
| Minimum chamfer dimension 1 | r1 min | 0.60 | mm |
| Pitch circle diameter (holes) | J | 118 | mm |
| Split | n x t | 30 | ° |
| Width, outer ring | C | 22.50 | mm |
| Rip diameter shaft washer | d1 | 100 | mm |
| Outside diameter wave washer long | D3 | 98 | mm |
| Width wave washer long | B1 | 38.50 | mm |
| Minimum chamfer dimension | rmin | 0.30 | mm |
| Diameter lubrication hole | ds | 6 | mm |
| Number (screwing holes) | n | 12 |
