| Bore diameter | d | 40 | mm |
| Hight | H2 | 75 | mm |
| Basic static load rating, axial | C0a | 315,000 | |
| Basic static load rating, radial | C0r | 74,000 | |
| Fatigue load limit, radial | Cur | 10,400 | |
| Limiting speed for grease lubrication | nG Grease | 1,200 |
| Outside diameter | D | 115 | mm |
| Basic dynamic load rating, axial | Ca | 117,000 | |
| Basic dynamic load rating, radial | Cr | 38,000 | |
| Fatigue load limit, axial | Cua | 27,000 | |
| Limiting speed for oil lubrication | nG Oil | 3,700 | |
| Bearing friction torque | MRL | 1.84 | Nm |
| Maximum diameter of housing shoulder | Da max | 79 | mm |
| Minimum diameter shaft shoulder | da min | 65 | mm |
| Height outer ring over wave washer | H1 | 47.50 | mm |
| Distance to lubrication hole | Ca | 12.50 | mm |
| Width, inner ring | B | 16 | mm |
| Diameter lubrication hole | ds | 6 | mm |
| Number (screwing holes) | n | 12 |
| Width, outer ring | C | 22.50 | mm |
| Rip diameter shaft washer | d1 | 78 | mm |
| Minimum chamfer dimension | rmin | 0.60 | mm |
| Pitch circle diameter (holes) | J | 94 | mm |
| Split | n x t | 30 | ° |
