| Bore diameter | d | 40 | mm |
| Height | T | 70 | mm |
| Basic static load rating, axial | C0a | 163,000 | |
| Basic static load rating, radial | C0r | 53,000 | |
| Fatigue load limit, radial | Cur | 7,600 | |
| Limiting speed for grease lubrication | nG Grease | 1,600 |
| Outside diameter | D | 100 | mm |
| Basic dynamic load rating, axial | Ca | 59,000 | |
| Basic dynamic load rating, radial | Cr | 27,500 | |
| Fatigue load limit, axial | Cua | 14,200 | |
| Limiting speed for oil lubrication | nG Oil | 4,400 | |
| Bearing friction torque | MRL | 0.74 | Nm |
| Maximum diameter of housing shoulder | Da max | 66 | mm |
| Minimum diameter shaft shoulder | da min | 48 | mm |
| Height outer ring over wave washer | H1 | 51 | mm |
| Distance to lubrication hole | Ca | 10 | mm |
| Heeldiameter wave washer long | D2 | 50 | mm |
| Width, wave washer | B | 11 | mm |
| Width heel wave washer long | B2 | 14 | mm |
| Minimum chamfer dimension 1 | r1 min | 0.60 | mm |
| Pitch circle diameter (holes) | J | 80 | mm |
| Split | n x t | 45 | ° |
| Width, outer ring | C | 18 | mm |
| Rip diameter shaft washer | d1 | 65 | mm |
| Outside diameter wave washer long | D3 | 63 | mm |
| Width wave washer long | B1 | 27 | mm |
| Minimum chamfer dimension | rmin | 0.30 | mm |
| Diameter lubrication hole | ds | 3.20 | mm |
| Number (screwing holes) | n | 8 |
| Manufacturer | Part Number |
|---|---|
| NADELLA | ARNBT 40 100/1 |
| APB | AXZF40100-X-L-TVPB |
| Unitec | SRB40100FL |
