| Bore diameter | d | 110 | mm |
| Width | B | 63 | mm |
| Basic static load rating, radial | C0r | 600,000 | |
| Limiting speed | nG | 1,020 |
| Outside diameter | D | 200 | mm |
| Basic dynamic load rating, radial | Cr | 550,000 | |
| Fatigue load limit, radial | Cur | 64,000 |
| Minimum diameter shaft shoulder | da min | 122 | mm |
| Maximum diameter of housing shoulder | Da max | 188 | mm |
| Minimum cavity diameter of the sleeve | db min | 118 | mm |
| Maximum diameter of shaft shoulder | da max | 124.90 | mm |
| Maximum recess radius | ra max | 2.10 | mm |
| Minimum cavity width of the sleeve | Ba min | 6 | mm |
| Minimum chamfer dimension | rmin | 2.10 | mm |
| Raceway diameter of the inner ring | d2 | 124.90 | mm |
| Width of lubricating groove | ns | 9.50 | mm |
| Bore diameter outer ring | D1 | 182.60 | mm |
| Diameter lubrication hole | ds | 4.80 | mm |
