| Bore diameter | d | 70 | mm |
| Width | B | 38 | mm |
| Basic static load rating, radial | C0r | 226,000 | |
| Limiting speed | nG | 1,670 |
| Outside diameter | D | 125 | mm |
| Basic dynamic load rating, radial | Cr | 211,000 | |
| Fatigue load limit, radial | Cur | 28,500 |
| Minimum diameter shaft shoulder | da min | 82.50 | mm |
| Maximum diameter of housing shoulder | Da max | 116 | mm |
| Minimum cavity diameter of the sleeve | db min | 75 | mm |
| Maximum diameter of shaft shoulder | da max | 82.50 | mm |
| Maximum recess radius | ra max | 1.50 | mm |
| Minimum cavity width of the sleeve | Ba min | 11 | mm |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Raceway diameter of the inner ring | d2 | 82.50 | mm |
| Width of lubricating groove | ns | 6.50 | mm |
| Bore diameter outer ring | D1 | 113.50 | mm |
| Diameter lubrication hole | ds | 3.20 | mm |
