| Bore diameter | d | 45 | mm |
| Width | B | 28 | mm |
| Basic static load rating, radial | C0r | 99,000 | |
| Limiting speed | nG | 2,550 |
| Outside diameter | D | 85 | mm |
| Basic dynamic load rating, radial | Cr | 104,000 | |
| Fatigue load limit, radial | Cur | 13,000 |
| Minimum diameter shaft shoulder | da min | 51.40 | mm |
| Maximum diameter of housing shoulder | Da max | 78 | mm |
| Minimum cavity diameter of the sleeve | db min | 50 | mm |
| Maximum diameter of shaft shoulder | da max | 51.40 | mm |
| Maximum recess radius | ra max | 1 | mm |
| Minimum cavity width of the sleeve | Ba min | 8 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Raceway diameter of the inner ring | d2 | 51.40 | mm |
| Width of lubricating groove | ns | 4.80 | mm |
| Bore diameter outer ring | D1 | 77.80 | mm |
| Diameter lubrication hole | ds | 3.20 | mm |
