a)
Hydraulic connection*) G1 on two sides
b)
In addition, both middle mounting holes must be used!
*) Only one connection needed.
All connections sealed upon delivery.
| S2 | M16 | ||
| N2 (For mounting from below with DIN 7984) | 21.50 | mm | |
| H1 | 76 | mm | |
| G1 | 1/4" | ||
| E3 | 82 | mm | |
| E1 | 142 | mm | |
| B1 | 227 | mm |
| S1 | 14.50 | mm | |
| N1 (For mounting from below with ISO 4762) | 23 | mm | |
| H | 90 | mm | |
| F | 20 | mm | |
| E2 | 110 | mm | |
| B3 | 245 | mm | |
| A | 170 | mm |
| Permissible ambient temperature (min ... max) | 0 °C ... +70 °C | ||
| Operating conditions | Operating conditions | ||
| Max. hydraulic operating pressure | 150 | bar | |
| Holding force (The inspection is done in a mounted state with a lubricated layer (ISO-VG 68). For permissible holding forces see “Technical data and calculations.” ,At 150 bar) | 22,700 | N |
| Size | 65 | ||
| Mass | 17.30 | kg | |
| Displacement (Per clamping) | 3.80 | cm³ |
