| V | 46 | mm | |
| e | 72 | ||
| m | 25 | ||
| O2 (DIN6912-8.8, only applicable for bolting with steel or cast iron threads.) | M10x30 | ||
| T | 13 | mm | |
| V | 10 | mm |
| A | 94 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 68 mm ±0.01 | ||
| O1 (DIN 6912-8.8) | M14x50 | ||
| T (For transverse loads on the Linear Bushing opening and when approaching maximum load, as well as when dimensional accuracy is strictly required. ) | 300 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 14 | mm |
| L | 600 | mm | |
| m | 3.16 | kg |
| Tolerance for L | - 500 µm - 1500 µm |
