| D | 90 | mm | |
| C | 125 | mm | |
| C2 | 3.15 | ||
| e (Minimum size in relation to shaft Ø d) | 27 | ||
| S1 (Holes at center of dimension C) | 6 mm +0.1 |
| A | 60 | mm | |
| C1 | 101.30 | H13 | |
| D1 | 86.50 | mm | |
| K1 | - | ||
| S2 | - |
| amax | 150 | m/s² | |
| m | 1 | kg | |
| Breakaway force (One wiper seal: Multiply by a factor of 0.5.) | 18 | N | |
| Rows of balls | 6 | ||
| Shaft radial clearance h6/bore K7 | + 31 - 11 |
||
| Operating conditions | Operating conditions |
| vmax | 5 | m/s | |
| FR (One wiper seal: Multiply by a factor of 0.5.,Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 7 | N | |
| m (Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. ) | 0,001 ... 0,004 | ||
| Shaft radial clearance h6/bore H7 | + 56 + 14 |
||
| Shaft radial clearance h6/bore M7 | + 21 - 21 |
||
| Permissible ambient temperature (min ... max) | -20 °C ... +80 °C |
