| D | 21 | mm |
| C | 28 mm ±0.2 |
| amax | 150 | m/s² | |
| m | 0.02 | kg | |
| Breakaway force (One wiper seal: Multiply by a factor of 0.5.) | 1.80 | N | |
| Rows of balls | 5 | ||
| Operating conditions | Operating conditions |
| vmax | 5 | m/s | |
| FR (One wiper seal: Multiply by a factor of 0.5.,Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 0.90 | N | |
| m (Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. ) | 0,001 ... 0,004 | ||
| Shaft radial clearance h6/bore H7 | + 32 0 |
||
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
