| Contact angle | α | 35 | ° |
| Radius retaining slot | rn | 1 | mm |
| Hight retaining slot | t | 8.10 | mm |
| Shoulder diameter inner ring | d1 | 121 | mm |
| Minimum chamfer dimension | rmin | 2.10 | mm |
| Angle retaining slot | 45 | ° | |
| Width retaining slot | b | 6.50 | mm |
| Distance between the apexes of the pressure cones | a | 93 | mm |
| Shoulder diameter outer ring | D1 | 144.40 | mm |
| Maximum fillet radius | ra max | 2.10 | mm |
| Minimum diameter shaft shoulder | da min | 107 | mm |
| Maximum diameter of housing shoulder | Da max | 158 | mm |
| Reference speed | nϑr | 3,700 | |
| Fatigue load limit, radial | Cur | 10,400 | |
| Basic dynamic load rating, radial | Cr | 190,000 | |
| Outside diameter | D | 170 | mm |
| Limiting speed | nG | 7,000 | |
| Basic static load rating, radial | C0r | 212,000 | |
| Width | B | 32 | mm |
| Bore diameter | d | 95 | mm |
