| Bore diameter | d | 220 | mm |
| Width | B | 56 | mm |
| Basic static load rating, radial | C0r | 730,000 | |
| Limiting speed | nG | 3,250 |
| Outside diameter | D | 340 | mm |
| Basic dynamic load rating, radial | Cr | 440,000 | |
| Fatigue load limit, radial | Cur | 22,800 | |
| Reference speed | nϑr | 1,690 |
| Minimum diameter shaft shoulder | da min | 232.40 | mm |
| Maximum fillet radius | ra max | 2.50 | mm |
| Maximum diameter of housing shoulder | Da max | 327.60 | mm |
| Minimum chamfer dimension | rmin | 3 | mm |
| Shoulder diameter inner ring | d1 | 261.40 | mm |
| Hight retaining slot | t | 12.70 | mm |
| Radius retaining slot | rn | 2 | mm |
| Contact angle | α | 35 | ° |
| Shoulder diameter outer ring | D1 | 298.50 | mm |
| Distance between the apexes of the pressure cones | a | 196 | mm |
| Width retaining slot | b | 10.50 | mm |
| Angle retaining slot | 45 | ° |
