| Bore diameter | d | 200 | mm |
| Width | B | 51 | mm |
| Basic static load rating, radial | C0r | 620,000 | |
| Limiting speed | nG | 3,600 |
| Outside diameter | D | 310 | mm |
| Basic dynamic load rating, radial | Cr | 390,000 | |
| Fatigue load limit, radial | Cur | 22,000 | |
| Reference speed | nϑr | 1,890 |
| Minimum diameter shaft shoulder | da min | 210.20 | mm |
| Maximum fillet radius | ra max | 2.10 | mm |
| Maximum diameter of housing shoulder | Da max | 299.80 | mm |
| Minimum chamfer dimension | rmin | 2.10 | mm |
| Shoulder diameter inner ring | d1 | 238.90 | mm |
| Hight retaining slot | t | 12.70 | mm |
| Radius retaining slot | rn | 2 | mm |
| Contact angle | α | 35 | ° |
| Shoulder diameter outer ring | D1 | 271.50 | mm |
| Distance between the apexes of the pressure cones | a | 179 | mm |
| Width retaining slot | b | 10.50 | mm |
| Angle retaining slot | 45 | ° |
