Specifications
| Series (MS) | MS-series |
|---|---|
| Size (6) | Grid dimension 62 mm |
| Function (EE) | On/off valve, electric |
| Pneumatic connection (1/2) | Female thread G1/2 |
| Supply voltage (V24) | 24 V DC (connection pattern to EN 175301) |
| Silencer | None |
| Pressure gauge alternatives | None |
|---|---|
| Alternative pressure gauge scale | MS pressure gauge |
| Type of mounting | Without mounting bracket |
| EU certification | None |
| UL certification | None |
| Flow direction (Z) | Flow direction from right to left |
| Material housing | Die-cast aluminium | ||
| Pilot air supply | Internal | ||
| Product weight | 740 g | ||
| Mounting position | optional | ||
| Suitable for use with food | See supplementary material information | ||
| Explosion ignition protection type for dust | Ex tc IIIC T105°C X Dc IP65 | ||
| ATEX category dust | II 3D | ||
| Explosion protection | Zone 2 (ATEX) Zone 22 (ATEX) | ||
| KC mark | KC-EMV | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| Media temperature | -10 °C ... 60 °C | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gases | ||
| Duty cycle | 100% | ||
| Operating pressure | 4 bar ... 18 bar | ||
| Valve function | 3/2-way, closed, monostable | ||
| Type of reset | Mechanical spring | ||
| Exhaust-air function | Without flow control option | ||
| Design | Piston gate valve |
| Material seals | NBR | ||
| Pneumatic connection, port 3 | G1/2 | ||
| Flow direction | Non-reversible | ||
| Type of mounting | In-line installation With accessories Either: | ||
| Explosion ambient temperature | -10°C <= Ta <= +60°C | ||
| Explosion ignition protection type for gas | Ex nA IIC T4 X Gc | ||
| ATEX category gas | II 3G | ||
| CE mark (see declaration of conformity) | To EU EMC Directive To EU Explosion Protection Directive (ATEX) To EU Low Voltage Directive | ||
| Approval | c UL us - Recognized (OL) | ||
| Degree of protection | IP65 | ||
| Note on materials | RoHS-compliant | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Characteristic coil data | 110 V AC: 50/60 Hz, pick-up power 3.0 VA, holding power 2.4 VA 230 V AC: 50/60 Hz, pick-up power 3.0 VA, holding power 2.4 VA 24 V DC: 1.5 W 24 V DC: 2.5 W | ||
| Standard nominal flow rate | 2.600 l/min ... 7.000 l/min | ||
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Prepared for G1/4 Via pressure sensor With pressure gauge | ||
| Type of piloting | Pilot actuated | ||
| Manual override | Detenting None Non-detenting | ||
| Type of actuation | Electric |