| Distance between the apexes of the pressure cones | a | 49 | mm |
| Minimum diameter injection pitch | Etk min | 138.60 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 145.10 | mm |
| Maximum recess radius | ra max | 1 | mm |
| Shoulder diameter outer ring | Da | 169 | mm |
| Diameter shaft shoulder | da | 131 | mm |
| Limiting speed for oil lubrication | nG Oil | 14,000 | |
| Fatigue load limit, radial | Cur | 4,900 | |
| Basic dynamic load rating, radial | Cr | 109,000 | |
| Outside diameter | D | 180 | mm |
| Limiting speed for grease lubrication | nG Grease | 9,500 | |
| Basic static load rating, radial | C0r | 75,000 | |
| Width | B | 28 | mm |
| Bore diameter | d | 120 | mm |
| Contact angle | α | 25 | ° |
| Minimum chamfer dimension | rmin | 2 | mm |
