| Ball diameter | dK | 83 | mm |
| Outer eye diameter | d2 | 132 | mm |
| Shank diameter | d4 | 70 | mm |
| Width of the rod end | C1 | 52 | mm |
| Thread length Internal thread | l3 | 64 | mm |
| Distance drilling with/shaft start | l7 | 62 | mm |
| Shank diameter, large | d5 | 114 | mm |
| Edge Spacing | r1smin | 1 | mm |
| Cylinder Force | FZ | 200,000 | |
| Bore diameter bearing, upper tolerance | dOT | 0.03 | mm |
| Width inner ring, lower tolerance | BUT | -0.30 | mm |
| Outer flange diameter inner ring | d1 | 71.50 | mm |
| Thread size | d3 | M48x2 | |
| Shank Length Internal thread head | h1 | 140 | mm |
| Tilt angle | α | 4 | ° |
| Total length internal thread head | l4 | 211 | mm |
| Welding Shank Diameter | d 7 | M12x35 | |
| Width | B | 38 | mm |
| Radial Clearance | Gr | 0,055 - 0,142 | |
| Tightening torque | MA | 80 | Nm |
| Bore diameter bearing, tolerance | dT | H7 |
| Bore diameter bearing | d | 63 | mm |
| Width inner ring, | B | 63 | mm |
| Basic static load rating, radial | C0r | 321,000 |
| Outside diameter bearing | D | 95 | mm |
| Basic dynamic load rating, radial | Cr | 254,000 |
| Manufacturer | Part Number |
|---|---|
| SKF | SIQG63 ES (SKF) |
