| Ball diameter | dK | 130 | mm |
| Outer eye diameter | d2 | 210 | mm |
| Shank diameter | d4 | 110 | mm |
| Width of the rod end | C1 | 84 | mm |
| Thread length Internal thread | l3 | 96 | mm |
| Distance drilling with/shaft start | l7 | 98 | mm |
| Shank diameter, large | d5 | 178 | mm |
| Edge Spacing | r1smin | 1 | mm |
| Cylinder Force | FZ | 500,000 | |
| Bore diameter bearing, upper tolerance | dOT | 0.04 | mm |
| Width inner ring, lower tolerance | BUT | -0.35 | mm |
| Outer flange diameter inner ring | d1 | 113 | mm |
| Thread size | d3 | M80x3 | |
| Shank Length Internal thread head | h1 | 210 | mm |
| Tilt angle | α | 4 | ° |
| Total length internal thread head | l4 | 322 | mm |
| Welding Shank Diameter | d 7 | M20x60 | |
| Width | B | 62 | mm |
| Radial Clearance | Gr | 0,065 - 0,165 | |
| Tightening torque | MA | 385 | Nm |
| Bore diameter bearing, tolerance | dT | H7 |
| Bore diameter bearing | d | 100 | mm |
| Width inner ring, | B | 100 | mm |
| Basic static load rating, radial | C0r | 840,000 |
| Outside diameter bearing | D | 150 | mm |
| Basic dynamic load rating, radial | Cr | 608,000 |
| Manufacturer | Part Number |
|---|---|
| SKF | SIQG100 ES (SKF) |
