REXROTH G10
9 Products
Discover all the available configurations for the REXROTH G10 product series Subplate. Find the right product by filtering with Number of main ports, Actuator ports P, A, B, T, Control system ports and Porting pattern.
G10 Type Codes
| Series | Catalog Number Format | Description |
|---|---|---|
| G10 | G- - - -1X- - | Subplate |
Typecode for Catalog Number G10,
G- - - -1X- -
| 001 | Series |
|---|---|
| G | Subplate |
| 002 | Size |
| 04 | NG4 |
| 05 | NG5 |
| 06 | NG6 |
| 10 | NG10 |
| 16 | NG16 |
| 20 | NG20 |
| 25 | NG25 |
| 30 | NG30 |
| 32 | NG32 |
| 003 | Porting pattern |
| A | Directional valves with one tank port, flow control valves |
| C | Isolator, directional, pressure and flow control valves |
| D | Isolator, directional, pressure and flow control valves |
| E | Pressure relief valves |
| G | Flow control valves |
| R | Rexroth-specific hole pattern |
| U | ISO 4401-03-02-0-05 and NFPA T3.5.1 R2-2002 D03, with 4 mm locating pin bore |
| V | Valves up to 630 bar |
| 004 | Number of main ports |
| 2 | 2 main ports A, B / X, Y / P, T / P, A |
| 3 | 3 main ports P, A, T |
| 4 | 4 main ports P, A, B, T |
| 005 | Component series |
| 1X | 10 … 19 (10 … 19: unchanged installation and connection dimensions) |
| 006 | Actuator ports P, A, B, T |
| G1/4 | G1/4 |
| G3/8 | G3/8 |
| G3/4 | G3/4 |
| G1/2 | G1/2 |
| G1 | G1 |
| G1 1/4 | G1 1/4 |
| G1 1/2 | G1 1/2 |
| M14 | M14 |
| M18 | M18 |
| M22 | M22 |
| M27 | M27 |
| M33 | M33 |
| M48 | M48 |
| NPT 1/2 | NPT 1/2 |
| NPT 1 | NPT 1 |
| UNF7/8-12 | 7/8-12UNF |
| UNF3/4-16 | 3/4-16UNF |
| UNF9/16-18 | 9/16-18UNF |
| UNF7/8-20 | 7/8-20UNF |
| UNF7/16-20 | 7/16-20UNF |
| UN1 1/16-12 | 1 1/16-12UN |
| UN1 5/16-12 | 1 5/16-12UN |
| UN1 5/8-12 | 1 5/8-12 UN |
| UN1 7/8-12 | 1 7/8-12 UN |
| FL19 | Flange ISO 6164 DN19 |
| FL32 | Flange ISO 6164 DN32 |
| FL51 | Flange ISO 6164 DN51 |
| 007 | Control system ports |
|---|---|
| G1/4 | G1/4 |
| G3/8 | G3/8 |
| G1/2 | G1/2 |
| M14 | M14 |
| M18 | M18 |
| UNF 20 | 7/16-20UNF |
| UNF 18 | 9/16-18UNF |
| UNF20 | 7/16-20UNF |
| UNF18 | 9/16-18UNF |
| 008 | Porting pattern |
| Rear ports | |
| S | Lateral ports |
| 009 | Design (outer dimensions) |
| Standard size | |
| M | Small design 'mini' |
| L | Large design 'large' |
| 010 | Corrosion resistance |
| Standard | |
| J3 | Improved corrosion protection (240 h in salt spray test according to DIN EN ISO 9227) |
| J5 | Maximum corrosion protection (720 h in salt spray test according to DIN EN ISO 9227) |
| 011 | Special versions |
| SO003 | With additional port L |
| SO331 | Special hole pattern with leakage oil connection on top for 5-4WE 10 -5X/… |
| SO699 | High-pressure valves 500 bar |
| SO771 | Special hole pattern without port X but with leakage oil connection such as standard hole pattern for 5-4 WE 10 ..-5X/… |
| SO001 | Name plate on the opposite side |
| None |