| Brand | snr | ||
| BRF - Rotational frequency – rolling element (60 rpm) | 2,348 Hz | ||
| BPFI - Over rolling frequency on inner (60 rpm) | 5,418 Hz | ||
| Recommended tightening torque for set screw | 11,5 N-m | ||
| Operating temperature max. | 200 °C | ||
| C0 - Static load rating | 15,2 kN | ||
| SW - Wrench size | 4 mm | ||
| S - Distance front side/bearing centre | 9,5 mm | ||
| m - Distance to set screw | 6,5 mm | ||
| D - Outer diameter of OR | 72 mm | ||
| d - Shaft diameter | 35 mm | ||
| C - Width of Outer Ring | 17 mm | ||
| B1 - Overall width Inner Ring | 38,9 mm |
| FTF - Rotational frequency - cage (60 rpm) | 0,398 Hz | ||
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,696 Hz | ||
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,582 Hz | ||
| mass | 0,5 kg | ||
| Operating temperature min. | -20 °C | ||
| C - Dynamic load rating | 25,7 kN | ||
| f0 - Factor | 14 | ||
| r - Radius Inner Ring | 1.10 | ||
| G - Set screw size | M8x1 | ||
| d1 - Outer dia of eccent. Lock. collar / nut of adapter sleeve | 51,1 mm | ||
| C1 - Distance center of OR to center of lubrication zone | 5,7 mm | ||
| B2 - Width of eccentric locking collar/nut | 17,5 mm | ||
| B - Width of Inner Ring | 25,4 mm |
