FESTO 193995 iso cylinder

Name: 193995 FESTO
Brand: FESTO
SKU: 727541-en-gbp
Price: 443.07 GBP
Availability: SoldOut

DSNU-63-125-KP-P-A

£443.07 ~~£516.91~~ -14%

Limited stock only available on quotation

Specifications

Series (DSNU)	Round cylinder, double-acting, based on ISO 6432
Piston diameter [mm] (63)	63
Stroke [mm] (125)	125
Clamping unit (KP)	attached
Cushioning (P)	Elastic cushioning rings/plates on both sides
Position sensing (A)	For proximity sensor
Special material properties	None
Cylinder end cap	Standard
Protection against rotation	None
Piston rod type	At one end

Piston rod thread extension	None
K6 - Shortened male piston rod thread	None
Piston rod thread type	Male thread
Custom thread	None
Piston rod extension	None
Temperature range	Standard
Constant motion	Standard
Corrosion protection	Standard
Scraper variant	Standard
EU certification	None

Material cylinder barrel		High-alloy stainless steel
Material seals		NBR TPE-U(PU)
Note on materials		RoHS-compliant
Type of mounting		With accessories
Basic weight for 0 mm stroke		1.445 g
Moving mass for 0 mm stroke		459 g
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke		1.682 N
Ambient temperature		-20 °C ... 120 °C
Note on operating and pilot medium		Lubricated operation possible (in which case lubricated operation will always be required)
Explosion ambient temperature		-20°C <= Ta <= +60°C
Explosion ignition protection type for gas		Ex h IIC T4 Gb
ATEX category gas		II 2G
CE mark (see declaration of conformity)		To EU Explosion Protection Directive (ATEX)
Operating pressure		1 bar ... 10 bar
Variants		Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Piston rod with male thread shortened at one end Extended piston rod Clamping unit on the piston rod Axial supply port With direct mounting Lateral supply port Metal scraper With protection against rotation High corrosion protection Dust protection Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Piston rod at one end
Design		Piston Piston rod Cylinder barrel
Cushioning		Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends
Stroke		1 mm ... 500 mm

Material piston rod		High-alloy stainless steel
Material cover		Wrought aluminium alloy
Pneumatic connection		G3/8
Additional weight per 10 mm stroke		44 g
Additional moving mass per 10 mm stroke		25 g
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke		1.870 N
Cushioning length		21 mm
Corrosion resistance class CRC		2 - Moderate corrosion stress 3 - high corrosion stress
Operating medium		Compressed air to ISO 8573-1:2010 [7:4:4]
Explosion ignition protection type for dust		Ex h IIIC T120°C Db
ATEX category dust		II 2D
Explosion protection		Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
Mode of operation		Double-acting
Protection against torque/guide		Square piston rod
Position detection		Via proximity switch
Mounting position		optional
Piston diameter		63 mm