| Minimum chamfer dimension | rmin | 1 | mm |
| Contact angle | α | 15 | ° |
| Bore diameter | d | 30 | mm |
| Width | B | 16 | mm |
| Basic static load rating, radial | C0r | 10,400 | |
| Limiting speed for grease lubrication | nG Grease | 24,000 |
| Outside diameter | D | 62 | mm |
| Basic dynamic load rating, radial | Cr | 23,100 | |
| Fatigue load limit, radial | Cur | 1,100 | |
| Limiting speed for oil lubrication | nG Oil | 38,000 |
| Diameter shaft shoulder | da | 37.50 | mm |
| Shoulder diameter outer ring | Da | 54.50 | mm |
| Maximum recess radius | ra max | 0.30 | mm |
| Maximum diameter injection pitch | Etk max | 43.70 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 41.20 | mm |
| Distance between the apexes of the pressure cones | a | 14.20 | mm |
