| Minimum chamfer dimension | rmin | 0.60 | mm |
| Contact angle | α | 25 | ° |
| Bore diameter | d | 15 | mm |
| Width | B | 11 | mm |
| Basic static load rating, radial | C0r | 4,850 | |
| Limiting speed for grease lubrication | nG Grease | 40,000 |
| Outside diameter | D | 35 | mm |
| Basic dynamic load rating, radial | Cr | 11,100 | |
| Fatigue load limit, radial | Cur | 520 | N |
| Limiting speed for oil lubrication | nG Oil | 60,000 |
| Diameter shaft shoulder | da | 19.50 | mm |
| Shoulder diameter outer ring | Da | 30.50 | mm |
| Maximum recess radius | ra max | 0.30 | mm |
| Maximum diameter injection pitch | Etk max | 23.40 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 21.70 | mm |
| Distance between the apexes of the pressure cones | a | 11.30 | mm |
