| Contact angle | α | 15 | ° |
| Minimum chamfer dimension | rmin | 2.10 | mm |
| Distance between the apexes of the pressure cones | a | 53.80 | mm |
| Minimum diameter injection pitch | Etk min | 210.90 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 221.90 | mm |
| Maximum recess radius | ra max | 1 | mm |
| Shoulder diameter outer ring | Da | 264 | mm |
| Diameter shaft shoulder | da | 196 | mm |
| Limiting speed for oil lubrication | nG Oil | 7,500 | |
| Fatigue load limit, radial | Cur | 14,200 | |
| Basic dynamic load rating, radial | Cr | 248,000 | |
| Outside diameter | D | 280 | mm |
| Limiting speed for grease lubrication | nG Grease | 4,800 | |
| Basic static load rating, radial | C0r | 203,000 | |
| Width | B | 46 | mm |
| Bore diameter | d | 180 | mm |
