| Minimum chamfer dimension | rmin | 2 | mm |
| Contact angle | α | 25 | ° |
| Bore diameter | d | 105 | mm |
| Width | B | 26 | mm |
| Basic static load rating, radial | C0r | 58,000 | |
| Limiting speed for grease lubrication | nG Grease | 7,500 |
| Outside diameter | D | 160 | mm |
| Basic dynamic load rating, radial | Cr | 80,000 | |
| Fatigue load limit, radial | Cur | 5,300 | |
| Limiting speed for oil lubrication | nG Oil | 12,000 |
| Diameter shaft shoulder | da | 116 | mm |
| Shoulder diameter outer ring | Da | 150 | mm |
| Maximum recess radius | ra max | 1 | mm |
| Maximum diameter injection pitch | Etk max | 128.30 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 123 | mm |
| Distance between the apexes of the pressure cones | a | 43.90 | mm |
