| Contact angle | α | 25 | ° |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Distance between the apexes of the pressure cones | a | 31 | mm |
| Minimum diameter injection pitch | Etk min | 82.40 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 86.70 | mm |
| Maximum recess radius | ra max | 0.60 | mm |
| Shoulder diameter outer ring | Da | 102 | mm |
| Diameter shaft shoulder | da | 77 | mm |
| Limiting speed for oil lubrication | nG Oil | 18,000 | |
| Fatigue load limit, radial | Cur | 3,100 | |
| Basic dynamic load rating, radial | Cr | 48,000 | |
| Outside diameter | D | 110 | mm |
| Limiting speed for grease lubrication | nG Grease | 11,000 | |
| Basic static load rating, radial | C0r | 29,000 | |
| Width | B | 20 | mm |
| Bore diameter | d | 70 | mm |
