536309 Festo

FESTO 536309 compact cylinder

Name: 536309 FESTO
Brand: FESTO
SKU: 725213-en-gbp
Price: 165.1 GBP
Availability: SoldOut

ADN-50-150-A-P-A-S11

£165.10 ~~£220.14~~ -25%

Limited stock only available on quotation

Specifications

Series (ADN)	Compact cylinder, double-acting, based on ISO 21287
Piston diameter [mm] (50)	50
Stroke [mm] (150)	150
Piston rod thread type (A)	Male thread
Cushioning (P)	Elastic cushioning rings/plates on both sides
Position sensing (A)	For proximity sensor
Special material properties	None
Protection against rotation	None
Piston rod type	At one end
Custom thread	None

Temperature range	Standard
Constant motion	Standard
Running characteristics (S11)	Low friction
Improved running performance	None
Corrosion protection	Standard
Captive rating plate	Rating plate, glued
Low temperature	None
Scraper variant	Standard
EU certification	None

Technical data

Material cylinder barrel		Wrought aluminium alloy Smooth anodised
Material cover		Aluminium Anodised
Pneumatic connection		G1/8
Additional weight per 10 mm stroke		51 g
Additional moving mass per 10 mm stroke		16 g
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke		1.057 N ... 1.178 N
Ambient temperature		-40 °C ... 120 °C
Suitability for the production of Li-ion batteries		Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils
Note on operating and pilot medium		Lubricated operation possible (in which case lubricated operation will always be required)
Explosion ambient temperature		-20°C <= Ta <= +60°C
Explosion ignition protection type for gas		Ex h IIC T4 Gb
ATEX category gas		II 2G
CE marking (see declaration of conformity)		To UK EX instructions
Mode of operation		Double-acting
Variants		EX protection approval (ATEX) Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. Improved running performance Extended male piston rod thread Custom thread on the piston rod Extended piston rod With protection against rotation High corrosion protection Dust protection Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Temperature range -40 to 80°C Piston rod at one end
Design		Piston Piston rod Profile barrel
Cushioning		Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning
Piston diameter		50 mm
LABS (PWIS) conformity		VDMA24364-B1/B2-L VDMA24364 zone III

Material piston rod		High-alloy steel
Note on materials		RoHS-compliant
Type of mounting		With through-hole Via female thread With accessories Either:
Basic weight for 0 mm stroke		540 g
Moving mass for 0 mm stroke		140 g
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke		1.057 N
Cleanroom class		Class 4 according to ISO 14644-1 Class 5 according to ISO 14644-1
Corrosion resistance class CRC		0 - No corrosion stress 2 - Moderate corrosion stress 3 - high corrosion stress
Operating medium		Compressed air to ISO 8573-1:2010 [7:4:4]
Explosion ignition protection type for dust		Ex h IIIC T120°C Db
ATEX category dust		II 2D
Explosion protection		Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
CE mark (see declaration of conformity)		To EU Explosion Protection Directive (ATEX)
Operating pressure		0,6 bar ... 10 bar
Position detection		Via proximity switch
Mounting position		optional
Based on standard		ISO 21287
Stroke		1 mm ... 400 mm