| Minimum chamfer dimension | rmin | 0.30 | mm |
| Shoulder diameter inner ring | d1 | 10.12 | mm |
| Shoulder diameter outer ring | D1 | 15.50 | mm |
| Bore diameter | d | 7 | mm |
| Width | B | 6 | mm |
| Basic static load rating, radial | C0r | 1,053 | |
| Limiting speed | nG | 53,000 |
| Outside diameter | D | 19 | mm |
| Basic dynamic load rating, radial | Cr | 2,614 | |
| Fatigue load limit, radial | Cur | 55 | N |
| Reference speed | nϑr | 35,000 |
| Minimum diameter shaft shoulder | da min | 9 | mm |
| Maximum fillet radius | ra max | 0.30 | mm |
| Maximum diameter of housing shoulder | Da max | 17 | mm |
| Manufacturer | Part Number |
|---|---|
| RHP | 607 |
| KOYO | 607 (KOYO) |
| NSK | 607 (NSK) |
| SKC | 5941188 |
| Alfatec | 2900.60003 |
| ZF | 0635335001 |
| Fiat | 9111682 |
| Fiat | 9911682 |
| Faun | 9013007 |
| NMB | R-1970 |
| Volvo | 181674 |
| Fiat | 2193611 |
| Steyr-Daimler-Puch | EL7 |
| SNR | 607 |
| Lancia | 82193611 |
| SNR | 607A11 |
| ISO | 7BC10 |
| SKC | 3014787 |
| SKF | 607/QE6 (SKF) |
| RIV Officine di Villar Perosa | EL7 |
| ADR | 607 |
| GMN | 607 |
| Neuweg Fertigung GmbH | 607 |
| Steyr-Daimler-Puch | 000625000607 |
| SKC | 9146408 |
| FLT | EL7 |
| SKF | 607 (SKF) |
| GPZ Bearings | 17 |
| RMB | R7190 |
