| design code | c : third design | ||
| paint | cd : blue primer per spec 209-13cd | ||
| shaft seal | 2 : fluorocarbon rubber shaft seal | ||
| maximum displacement option | 02 : external manual stroke adjustment (set at maximum) | ||
| torque control setting | 00 : no torque control or secondary compensator | ||
| pressure compensator setting | 28 : 206,8-213,7 bar [3000-3100 lbf/in2] | ||
| diagnostic pressure ports | 4 : m12 x 1.5 metric o-ring ports - suction and pressure ports - plugged | ||
| main ports size & location | ad : side ports; suction - 2.00 4-bolt split flange port standard pressure series (code 61) with m12 x 1.75 thread; pressure - 1.00 4-bolt split flange port standard pressure series (code 61) with m10 x 1.5 thread | ||
| input shaft rotation | r : right-hand rotation (cw) right side suction port, left side pressure port | ||
| code title | adu : pressure compensated/pressure flow compensated open circuit piston pump |
| identification / packaging | 00 : mark danfoss product number and full model code on label / individual box packaging | ||
| pump special features | 00 : no pump special features | ||
| auxiliary (rear) mount & output shaft | ac : dual sae j744 flange 101-2 (2 bolt b); accepts 13t 16/32 spline with 41,2 (1.62) extension (coupler and aux. mount o-ring included) | ||
| control special feature | 00 : no control special features | ||
| flow compensator setting | 14 : 12,41-15,17 bar [180-220 lbf/in2] | ||
| controller type | ab : pressure and flow compensator with m12 x 1.5 metric o-ring load sense port left side | ||
| drain port size & location | 3 : m27 x 2 metric o-ring port - top | ||
| front mounting & input shaft | 08 : 2 bolt b (sae j744-101-2) with 15 tooth 16/32 spline (ansi b92.1-1996 mod.), shaft extension 46 [1.81] | ||
| displacement | 080 : 80,0 cm3/r [4.88 in3/r] | ||
| pumps | adu080r08ad34ab281400000 2ac200cd00c |
