| medium-contacting part stopper material | stainless steel | ||
| rated power ac | 8,5 v·a | ||
| reduced power dc | 8,5 w | ||
| thermal insulation class of the actuator | h | ||
| coil size | 42 mm | ||
| coil type | placed on top | ||
| protection type ip (max. with suitable connector) | ip65 | ||
| electrical connection number of contacts | 2 + grounding conductor | ||
| power reduction integrated | yes | ||
| nominal operation/duty cycle | 100 % | ||
| switch time close min | 700 ms | ||
| switch time open min | 300 ms | ||
| valve construction | valve complete | ||
| flow | above seat | ||
| actuator type | plunger valve | ||
| Type | 6,213 | ||
| main valve orifice 1 (p) (mm) | 25 mm | ||
| kv value (water) | 11 m3/h | ||
| certification type | surveillance report according to din en 60730 | ||
| pilot control seal material | nbr (nitrile rubber) | ||
| seat seal material | nbr (nitrile rubber) | ||
| temperature environment max | 55 °c | ||
| temperature medium max | 80 °c | ||
| nominal pressure (din en 1333) | pn 10 | ||
| nominal pressure min | 0 bar | ||
| main valve wetted material | brass | ||
| valve seat material | brass | ||
| voltage tolerance negative | 10 % | ||
| voltage frequency | 50/60 hz | ||
| voltage min / rated voltage | 230 v | ||
| port connection 2 thread type | g | ||
| port connection 1 thread type | g | ||
| port connection 1 type | inner thread | ||
| valve function number of switching positions | 2 | ||
| Customscode | 84818079 |
| medium-contacting part core material | stainless steel | ||
| inrush power consumption ac | 85 v·a | ||
| rated power dc | 8,5 w | ||
| coil wiring overvoltage protection | without | ||
| coil insulation material (encasement) | epoxy | ||
| kick and drop coil | energy saving technology included | ||
| electrical connection position | in direction of flow left | ||
| installation length | 95 mm | ||
| pilot control centrally bolted | yes | ||
| switch time close max. | 1.500 ms | ||
| switch time open max. | 400 ms | ||
| switch function | on/off | ||
| main valve operating principle | diaphragm valve | ||
| operation | servo-controlled | ||
| generation | ev | ||
| main valve orifice 1 (inch) | 1 inch | ||
| pilot control orifice (mm) | 1,4 mm | ||
| rated power consumption | 85 w | ||
| approval type | vde | ||
| sealing toward outside material | nbr (nitrile rubber) | ||
| seat seal material category | elastomer | ||
| temperature environment min | -10 °c | ||
| temperature medium min | -10 °c | ||
| nominal pressure max (liquid) | 10 bar | ||
| pilot control material medium-contacting | pa (polyamide) | ||
| valve body cover material | stainless steel | ||
| ac voltage | yes | ||
| voltage tolerance positive | 10 % | ||
| voltage max / rated voltage | 240 v | ||
| port connection 2 thread marking | 1 | ||
| port connection 2 type | inner thread | ||
| port connection 1 thread marking | 1 | ||
| Valve function | a - normally closed - inlet port 1 (p/nc) | ||
| fluidic port connection number | 2 |
