| Contact angle | α | 30 | ° |
| Caliber diamter inner ring | d2 | 96.92 | mm |
| Minimum chamfer dimension | rmin | 2.10 | mm |
| Distance between the apexes of the pressure cones | a | 89.40 | mm |
| Caliber diameter outer ring | D2 | 133.65 | mm |
| Maximum fillet radius | ra max | 2.10 | mm |
| Minimum diameter shaft shoulder | da min | 82 | mm |
| Maximum diameter of housing shoulder | Da max | 138 | mm |
| Limiting speed | nG | 3,400 | |
| Basic static load rating, radial | C0r | 135,000 | |
| Width | B | 63.50 | mm |
| Bore diameter | d | 70 | mm |
| Fatigue load limit, radial | Cur | 8,900 | |
| Basic dynamic load rating, radial | Cr | 172,000 | |
| Outside diameter | D | 150 | mm |
