| Contact angle | α | 30 | ° |
| Caliber diamter inner ring | d2 | 25.80 | mm |
| Minimum chamfer dimension | rmin | 1 | mm |
| Distance between the apexes of the pressure cones | a | 24.80 | mm |
| Caliber diameter outer ring | D2 | 37.90 | mm |
| Maximum fillet radius | ra max | 1 | mm |
| Minimum diameter shaft shoulder | da min | 20.60 | mm |
| Maximum diameter of housing shoulder | Da max | 36.40 | mm |
| Reference speed | nϑr | 12,100 | |
| Fatigue load limit, radial | Cur | 720 | N |
| Basic dynamic load rating, radial | Cr | 17,000 | |
| Outside diameter | D | 42 | mm |
| Limiting speed | nG | 13,800 | |
| Basic static load rating, radial | C0r | 10,400 | |
| Width | B | 19 | mm |
| Bore diameter | d | 15 | mm |
