| Contact angle | α | 30 | ° |
| Caliber diamter inner ring | d2 | 76.60 | mm |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Distance between the apexes of the pressure cones | a | 64.70 | mm |
| Caliber diameter outer ring | D2 | 100.50 | mm |
| Maximum fillet radius | ra max | 1.50 | mm |
| Minimum diameter shaft shoulder | da min | 69 | mm |
| Maximum diameter of housing shoulder | Da max | 101 | mm |
| Limiting speed | nG | 4,750 | |
| Basic static load rating, radial | C0r | 64,000 | |
| Width | B | 36.50 | mm |
| Bore diameter | d | 60 | mm |
| Fatigue load limit, radial | Cur | 4,400 | |
| Basic dynamic load rating, radial | Cr | 75,000 | |
| Outside diameter | D | 110 | mm |
