| Contact angle | α | 25 | ° |
| Caliber diamter inner ring | d2 | 25.30 | mm |
| Minimum chamfer dimension | rmin | 0.60 | mm |
| Distance between the apexes of the pressure cones | a | 21.10 | mm |
| Caliber diameter outer ring | D2 | 36.40 | mm |
| Maximum fillet radius | ra max | 0.60 | mm |
| Minimum diameter shaft shoulder | da min | 23.20 | mm |
| Maximum diameter of housing shoulder | Da max | 38.80 | mm |
| Limiting speed | nG | 10,500 | |
| Basic static load rating, radial | C0r | 9,400 | |
| Width | B | 16 | mm |
| Bore diameter | d | 20 | mm |
| Fatigue load limit, radial | Cur | 490 | N |
| Basic dynamic load rating, radial | Cr | 14,300 | |
| Outside diameter | D | 42 | mm |
