| Minimum chamfer dimension | rmin | 0.20 | mm |
| Caliber diamter inner ring | d2 | 8.50 | mm |
| Contact angle | α | 25 | ° |
| Caliber diameter outer ring | D2 | 12.70 | mm |
| Distance between the apexes of the pressure cones | a | 6.90 | mm |
| Bore diameter | d | 5 | mm |
| Width | B | 7 | mm |
| Basic static load rating, radial | C0r | 940 | N |
| Limiting speed | nG | 38,000 |
| Outside diameter | D | 14 | mm |
| Basic dynamic load rating, radial | Cr | 1,780 | |
| Fatigue load limit, radial | Cur | 49 | N |
| Reference speed | nϑr | 31,500 |
| Minimum diameter shaft shoulder | da min | 6.40 | mm |
| Maximum fillet radius | ra max | 0.20 | mm |
| Maximum diameter of housing shoulder | Da max | 12.60 | mm |
