| Width of lubricating groove | ns | 9.50 | mm |
| Raceway diameter of the inner ring | d2 | 170.30 | mm |
| Minimum chamfer dimension | rmin | 2.10 | mm |
| Diameter lubrication hole | ds | 4.80 | mm |
| Bore diameter outer ring | D1 | 213 | mm |
| Maximum recess radius | ra max | 2.10 | mm |
| Minimum diameter shaft shoulder | da min | 162 | mm |
| Maximum diameter of housing shoulder | Da max | 238 | mm |
| Reference speed | nϑr | 1,270 | |
| Fatigue load limit, radial | Cur | 153,000 | |
| Basic dynamic load rating, radial | Cr | 1,050,000 | |
| Outside diameter | D | 250 | mm |
| Limiting speed | nG | 2,370 | |
| Basic static load rating, radial | C0r | 1,520,000 | |
| Width | B | 100 | mm |
| Bore diameter | d | 150 | mm |
