| Width of lubricating groove | ns | 9.50 | mm |
| Raceway diameter of the inner ring | d2 | 184.80 | mm |
| Minimum chamfer dimension | rmin | 2.10 | mm |
| Diameter lubrication hole | ds | 4.80 | mm |
| Bore diameter outer ring | D1 | 243.30 | mm |
| Maximum recess radius | ra max | 2.10 | mm |
| Minimum diameter shaft shoulder | da min | 180.20 | mm |
| Maximum diameter of housing shoulder | Da max | 249.80 | mm |
| Limiting speed | nG | 600 | 1/min |
| Basic static load rating, radial | C0r | 1,480,000 | |
| Width | B | 90 | mm |
| Bore diameter | d | 170 | mm |
| Fatigue load limit, radial | Cur | 162,000 | |
| Basic dynamic load rating, radial | Cr | 940,000 | |
| Outside diameter | D | 260 | mm |
