| Width of lubricating groove | ns | 6.50 | mm |
| Raceway diameter of the inner ring | d2 | 142.10 | mm |
| Minimum chamfer dimension | rmin | 2 | mm |
| Diameter lubrication hole | ds | 3.20 | mm |
| Bore diameter outer ring | D1 | 187.20 | mm |
| Maximum recess radius | ra max | 2 | mm |
| Minimum diameter shaft shoulder | da min | 138.80 | mm |
| Maximum diameter of housing shoulder | Da max | 191.20 | mm |
| Limiting speed | nG | 780 | 1/min |
| Basic static load rating, radial | C0r | 860,000 | |
| Width | B | 69 | mm |
| Bore diameter | d | 130 | mm |
| Fatigue load limit, radial | Cur | 103,000 | |
| Basic dynamic load rating, radial | Cr | 570,000 | |
| Outside diameter | D | 200 | mm |
