| Width of lubricating groove | ns | 6.50 | mm |
| Raceway diameter of the inner ring | d2 | 134.50 | mm |
| Minimum chamfer dimension | rmin | 2 | mm |
| Diameter lubrication hole | ds | 3.20 | mm |
| Bore diameter outer ring | D1 | 159.80 | mm |
| Maximum recess radius | ra max | 2 | mm |
| Minimum diameter shaft shoulder | da min | 128.80 | mm |
| Maximum diameter of housing shoulder | Da max | 171.20 | mm |
| Reference speed | nϑr | 2,360 | |
| Fatigue load limit, radial | Cur | 86,000 | |
| Basic dynamic load rating, radial | Cr | 450,000 | |
| Outside diameter | D | 180 | mm |
| Limiting speed | nG | 3,450 | |
| Basic static load rating, radial | C0r | 690,000 | |
| Width | B | 60 | mm |
| Bore diameter | d | 120 | mm |
