| Width of lubricating groove | ns | 15 | mm |
| Bore diameter outer ring | D1 | 350 | mm |
| Diameter lubrication hole | ds | 8 | mm |
| Minimum chamfer dimension | rmin | 2.10 | mm |
| Minimum cavity width of the sleeve | Ba min | 12 | mm |
| Maximum diameter of shaft shoulder | da max | 303 | mm |
| Maximum diameter of housing shoulder | Da max | 369.80 | mm |
| Minimum cavity diameter of the sleeve | db min | 290 | mm |
| Maximum recess radius | ra max | 2.10 | mm |
| Minimum diameter shaft shoulder | da min | 290.20 | mm |
| Reference speed | nϑr | 1,100 | |
| Fatigue load limit, radial | Cur | 133,000 | |
| Basic dynamic load rating, radial | Cr | 970,000 | |
| Outside diameter | D | 380 | mm |
| Limiting speed | nG | 2,000 | |
| Basic static load rating, radial | C0r | 2,040,000 | |
| Width | B | 75 | mm |
| Bore diameter | d | 280 | mm |
