| Width of lubricating groove | ns | 23.50 | mm |
| Bore diameter outer ring | D1 | 490.40 | mm |
| Diameter lubrication hole | ds | 12.50 | mm |
| Minimum chamfer dimension | rmin | 5 | mm |
| Minimum cavity width of the sleeve | Ba min | 13 | mm |
| Maximum diameter of shaft shoulder | da max | 378 | mm |
| Maximum diameter of housing shoulder | Da max | 560 | mm |
| Minimum cavity diameter of the sleeve | db min | 343 | mm |
| Maximum recess radius | ra max | 4 | mm |
| Minimum diameter shaft shoulder | da min | 340 | mm |
| Reference speed | nϑr | 510 | 1/min |
| Fatigue load limit, radial | Cur | 510,000 | |
| Basic dynamic load rating, radial | Cr | 4,650,000 | |
| Outside diameter | D | 580 | mm |
| Limiting speed | nG | 1,060 | |
| Basic static load rating, radial | C0r | 7,000,000 | |
| Width | B | 208 | mm |
| Bore diameter | d | 320 | mm |
