| Minimum chamfer dimension | rmin | 2.10 | mm |
| Diameter lubrication hole | ds | 4.80 | mm |
| Bore diameter outer ring | D1 | 185.50 | mm |
| Width of lubricating groove | ns | 9.50 | mm |
| Bore diameter | d | 120 | mm |
| Width | B | 76 | mm |
| Basic static load rating, radial | C0r | 1,020,000 | |
| Limiting speed | nG | 3,000 |
| Outside diameter | D | 215 | mm |
| Basic dynamic load rating, radial | Cr | 820,000 | |
| Fatigue load limit, radial | Cur | 82,000 | |
| Reference speed | nϑr | 1,910 |
| Minimum diameter shaft shoulder | da min | 132 | mm |
| Maximum recess radius | ra max | 2.10 | mm |
| Minimum cavity diameter of the sleeve | db min | 131 | mm |
| Maximum diameter of housing shoulder | Da max | 203 | mm |
| Maximum diameter of shaft shoulder | da max | 141 | mm |
| Minimum cavity width of the sleeve | Ba min | 17 | mm |
